CD4054BMT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Interface ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4054 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 10V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Configuration | 4 Segment |
| Operating Supply Current | 40nA |
| Nominal Supply Current | 100μA |
| Propagation Delay | 800 ns |
| Quiescent Current | 100μA |
| Logic Function | Decoder, Latch |
| Display Type | LCD |
| Max Frequency | 8MHz |
| Interface IC Type | LIQUID CRYSTAL DISPLAY DRIVER |
| High Level Output Current | -1.9mA |
| Low Level Output Current | 3.6mA |
| Multiplexed Display Capability | NO |
| Data Input Mode | PARALLEL |
| Number of Backplanes | 0-BP |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CD4054BMT Overview
Similar to Tape & Reel (TR), the package has been designed in a similar manner.In version 16-SOIC (0.154, 3.90mm Width), it is included.Its display type is LCD.On the board, this component is mounted using Surface Mount.This electrical component operates at -55°C~125°C degrees Celsius.I believe that it will work with a 3V~18VV power source.The 16 termination is used to terminate transmission lines with impedance-matched devices.Display drivers belongs to CD4054 family.There are a total of 21 16 pins on the device.There are 16 pins installed on it.Display drivers is mounted using the Surface Mount axis on the board, so that the component can be easily removed.Powered by 5V, it has a voltage supply.There is a need to supply 40nA with the necessary supply current for it to function at full capacity.In addition to this, it can also be included in Other Interface ICs.To ensure high efficiency, the supply voltage should be maintained at 10V.Electronic circuit boards called 0-BP backplanes are available.Drivers operates wDriversh the frequency of 8MHz. Drivers is configured wDriversh 4 output.There are basically four elements that make up a 1 element.As long as 100μA of quiescent current is consumed, it does not matter what external influences may be present.The interface IC type of this electrical part is LIQUID CRYSTAL DISPLAY DRIVER, which is used to control and manage the sharing of information between devices.
CD4054BMT Features
16-SOIC (0.154, 3.90mm Width) package
CD4054 family
16 pin count
16 pins
4 output
1 elements
CD4054BMT Applications
There are a lot of Texas Instruments CD4054BMT display drivers applications.
- Driving incandescent displays
- Smart Display
- Industrial Display
- Hand Held Instruments
- Car Audios / Radios
- Dlsplay Integrtty ls Compromissd
- Driving low-voltag fluorescent displays
- Industrial control panels
- Voltmeter
- Industrial Controllers
