CD4066BCN
| Parameters | |
|---|---|
| Max Supply Current | 1μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Quiescent Current | 10nA |
| Turn On Delay Time | 125 ns |
| Number of Inputs | 4 |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 125 ns |
| Number of Gates | 4 |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 4 |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Bilateral, FET Switches |
| Resistance | 5Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 700mW |
| Voltage - Supply | 3V~15V |
| Base Part Number | 4066 |
| Number of Outputs | 4 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 10nA |
| Power Dissipation | 700mW |
CD4066BCN Overview
As a means of saving space, digital switch is provided in the 14-DIP (0.300, 7.62mm).Tube is the packaging method.The mounting method digital switch ic uses is Through Hole.In the multiplexers, the analog IC is indicated by Bilateral, FET Switches.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 3V~15V.provides digital controlled switch's digital controlled switch'sMultiplexers in the 4000B series are suitable for a wide range of applications.There is a base part number 4066 that can be used to locate signal switch's related components as well.The supply type of this multiplexer ic is Dual, Single.There are 14 pins on it.It is positioned in the direction of Through Hole.In the signal multiplexer, there are 4 bits available.In order for the turn signal switch to work, there are 4 outputs.No external influence consumes 10nA current of multiplexer ic.The multiplexer provides 4 inputs.A resistance of 5Ohm is used to operate it.Transmission is carried out over 4 channels in the turn signal switch's circuit.Signal switchs at temperatures up to 125°C are acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -55°C.It is specified that the signal switches should operate at 15V as its maximum supply voltage.A minimum supply voltage of 3V is specified for the digital swith by its applicable specification.In order for the digitalswitch to function normally, it has 4 circuits.
CD4066BCN Features
Supplied in the 14-DIP (0.300, 7.62mm) package
Adopting a supply type of Dual, Single
CD4066BCN Applications
There are a lot of ON Semiconductor CD4066BCN Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- VGA
- Solenoid cooling fan
- Microprocessor instruction decoding
- Make full adder
- Implementing boolean functions with multiple variables
- Enabling block of memory depending on address in memory chips
- CNC machines
- Data bus control
- CPU memory location identification
