CD4066BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 240Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | CD4066 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Max Supply Current | 5μA |
| Throw Configuration | SPST |
| Quiescent Current | 20nA |
| Turn On Delay Time | 30 ns |
| Number of Inputs | 3 |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 30 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Input Capacitance | 8pF |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 70ns |
| Switch-off Time-Max | 70ns |
| Drain to Source Resistance | 470Ohm |
| Normal Position | NO |
| Ambient Temperature Range High | 125°C |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4066BE Overview
Providing this information in the 14-DIP (0.300, 7.62mm) enables digital switch board space to be saved.The package is in the form of Tube.The mounting method digital switch ic uses is Through Hole.In the multiplexers, the analog IC is indicated by Bilateral, FET Switches.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.Using a 3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 4000B series can be used for a wide range of applications.This configuration includes 14 terminations as part of its basic functionality.There is a base part number of CD4066 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V voltage.In this turn signal switch, there are 14 component pins.In this case, the supply type is Dual, Single.A configuration of 14 pins is used.Through Hole is the way it is mounted.The power supply of 5/15V is provided for mux switch's normal operation.The turn signal switch has 2 outputs designed for operation.Multiplexer or Switches is a category for the digital switch ics.Not being affected by the external factors, consumes 20nA current of multiplexer ic.This multiplexer has a total of 3 inputs.As far as the resistance is concerned, it operates with 240Ohm.This turn signal switch's circuit uses 4 transmission channels.
CD4066BE Features
Supplied in the 14-DIP (0.300, 7.62mm) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BE Applications
There are a lot of Texas Instruments CD4066BE Signal Switches / Multiplexers / Decoders applications.
- Solenoid cooling fan
- Data bus control
- Make full adder
- Relay
- Transmission from the computer system of a satellite
- Analog to digital conversion
- CPU memory location identification
- Enabling block of memory depending on address in memory chips
- VGA
- Textile mills
