CD4066BEE4
| Parameters | |
|---|---|
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bilateral, FET Switches |
| Resistance | 1.05kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | CD4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Max Supply Current | 5μA |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 70 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
CD4066BEE4 Overview
Due to the lack of space on the board, digital switch is provided in the 14-DIP (0.300, 7.62mm).Tube represents its packaging.digital switch ic uses the method of Through Hole for mounting.In the multiplexers, the analog IC Bilateral, FET Switches is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.The turn signal switch is designed for use with a 3V~18V supply voltage, which gives it a lot of flexibility.In addition to being a member of the 4000B series, these multiplexers have a wide range of applications.Among its basic features are 14 terminations.The base part number is CD4066, so you can find its logic switch related parts using that number.In this case, 5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 14 component pins.Dual, Single is used as its supply type.A total of 14 pins are configured on this board.This unit is mounted in the way of Through Hole.mux switch's normal operation requires the power supply of 5/15V.The digital switch ic is an electronic part classified into Multiplexer or Switches.A resistance of 1.05kOhm is used to operate it.The turn signal switch's circuit has 4 transmission channels.
CD4066BEE4 Features
Supplied in the 14-DIP (0.300, 7.62mm) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BEE4 Applications
There are a lot of Texas Instruments CD4066BEE4 Signal Switches / Multiplexers / Decoders applications.
- Code converters
- To select different task for memory in microprocessor memory systems
- Make half adder
- Microprocessor instruction decoding
- Textile mills
- Signal router
- HD surveillance system
- Steel plants
- Medical industry
- To select different devices in microprocessor input
