CD4066BM
| Parameters | |
|---|---|
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | CD4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Max Supply Current | 5μA |
| Throw Configuration | SPST |
| Quiescent Current | 20nA |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 70 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 240Ohm |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.75mm |
| Length | 8.65mm |
CD4066BM Overview
Digital switch is provided in the 14-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.Tube represents its packaging.In terms of mounting, digital switch ic uses the Surface Mount method .Bilateral, FET Switches is the analog IC that the multiplexers uses.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.Design engineers have more flexibility when digital controlled switch operates at 3V~18V voltage.Multiplexers in the 4000B series are suitable for a wide range of applications.Among its basic configurations are 14 terminations.The base part number is CD4066, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 5V voltage.This turn signal switch has a total of 14 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Dual, Single.This multiplexer ic is configured with 14 pins.It is positioned in the direction of Surface Mount.A power supply is provided for mux switch's normal operation of 5/15V.In electronic terms, the digital switch ic is classified as Multiplexer or Switches.Without the influence of external factors, it consumes 20nA current of multiplexer ic.1.05kOhm is the resistance at which it operates.A total of 4 channels are used for transmission in the turn signal switch's circuit.
CD4066BM Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BM Applications
There are a lot of Texas Instruments CD4066BM Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- Medical industry
- Metal detectors
- Idle motor
- Arithmetic Logic Units
- Electronics industry
- Computer memory
- Electronic circuits
- Time division multiplexing system
- Data-routing applications
