CD4066BM96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 240Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | CD4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Max Supply Current | 5μA |
| Throw Configuration | SPST |
| Quiescent Current | 20nA |
| Turn On Delay Time | 30 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 30 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 70ns |
| Switch-off Time-Max | 70ns |
| Drain to Source Resistance | 240Ohm |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4066BM96 Overview
Providing this information in the 14-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.In this case, it is packaged as Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Bilateral, FET Switches is used.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 3V~18V supply voltage, which gives it a lot of flexibility.With the 4000B series, the multiplexers are suitable for a diverse range of applications.Its basic configuration includes terminations in the 14 range.Its logic switch base part number is CD4066 which can also be used to find its logic switch related parts.The multiplexer is supplied with 5V voltage.A component pin count of 14 can be found on this turn signal switch.As a result, conductors end at GULL WING.Dual, Single is employed as its supply type.The board is configured with 14 pins.The mount is in Surface Mount.A power supply is provided for mux switch's normal operation of 5/15V.Multiplexer or Switches is a category for the digital switch ics.In the absence of external influences, it consumes 20nA current of multiplexer ic.A resistance of 240Ohm is used to operate the signal switching.Transmission is carried out over 4 channels in the turn signal switch's circuit.
CD4066BM96 Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BM96 Applications
There are a lot of Texas Instruments CD4066BM96 Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- Arithmetic Logic Units
- D/A converters
- Electronic circuits
- Decimal decoder
- Analog to digital conversion
- Memory system of computers
- Automatic Monitoring systems
- Solenoid cooling fan
- To select different devices in microprocessor input
