CD4066BM96G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bilateral, FET Switches |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | CD4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Max Supply Current | 5μA |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 70 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4066BM96G4 Overview
Digital switch is provided in the 14-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bilateral, FET Switches as the analog part of the circuit.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.A supply voltage of 3V~18V provides digital controlled switch's superior flexibility for designers.As a member of 4000B series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 14 terminations.Its logic switch base part number is CD4066 which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 14 is found on this turn signal switch.It is the end of conductors that is represented by GULL WING.Its supply type is Dual, Single, which is used as the source of power.This multiplexer ic has 14 pins configured.It is positioned in the direction of Surface Mount.A power supply is provided for mux switch's normal operation of 5/15V.Part number Multiplexer or Switches indicates that the digital switch ic is an electronic part.A resistance of 1.05kOhm is used to operate it.The turn signal switch's circuit consists of 4 transmission channels.
CD4066BM96G4 Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BM96G4 Applications
There are a lot of Texas Instruments CD4066BM96G4 Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- Data distribution
- Data demultiplexing
- Arithmetic Logic Units
- Communication system
- Steel plants
- GLAN
- Small scale TV wall
- Enabling different rows of memory depending on address in memory chips
- Analog to digital conversion
