CD4066BMT
| Parameters | |
|---|---|
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Max Supply Current | 5μA |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 70 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Type | Bilateral, FET Switches |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4066 |
CD4066BMT Overview
In order to conserve board space, digital switch is included in the 14-SOIC (0.154, 3.90mm Width).It is packaged according to the Tape & Reel (TR) method.Digital switch ic adheres to a mounting method of Surface Mount.The analog IC in the multiplexers is identified as Bilateral, FET Switches.When the operating temperature is kept at -55°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~18V voltage.Several applications are possible for 4000B series multiplexers.As part of its basic configuration, 14 terminations are designed as a part of it.In addition, it also has a base part number of CD4066, which can be used to find related parts.In this case, 5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 14 components that can be connected to each pin.As a result, conductors end at GULL WING.The supply type of this multiplexer ic is Dual, Single.The board is configured with 14 pins.Multiplexer ics are mounted in the direction of Surface Mount.The power supply of 5/15V is provided for mux switch's normal operation.Multiplexer or Switches is the classification for this the digital switch ic.With a resistance of 1.05kOhm, it operates.The turn signal switch's circuit has 4 transmission channels.
CD4066BMT Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BMT Applications
There are a lot of Texas Instruments CD4066BMT Signal Switches / Multiplexers / Decoders applications.
- Code converters
- Recording transmission
- PCIe
- Video transmission
- Microprocessor instruction decoding
- Logic circuits
- Frequency multiplexing system
- Night vision cameras
- Data-routing applications
- Combinational circuit
