CD4066BNSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Max Supply Current | 5μA |
| Throw Configuration | SPST |
| Quiescent Current | 20nA |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 70 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4066BNSR Overview
Due to the fact that it is provided in the 14-SOIC (0.209, 5.30mm Width), digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC is indicated by Bilateral, FET Switches.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 3V~18V.provides digital controlled switch's digital controlled switch'sSince they are members of the 4000B series, they can be used in a wide variety of applications.The basic configuration includes 14 terminations.There is a base part number CD4066 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 14 components that can be connected to each pin.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Dual, Single.This multiplexer ic is configured with 14 pins.The mount is in Surface Mount.There is a power supply provided for the mux switch's normal operation of 5/15V.Part number Multiplexer or Switches indicates that the digital switch ic is an electronic part.Without external influences, it consumes 20nA current of multiplexer ic.In terms of resistance, it has a value of 1.05kOhm.Transmission is carried out over 4 channels in the turn signal switch's circuit.
CD4066BNSR Features
Supplied in the 14-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BNSR Applications
There are a lot of Texas Instruments CD4066BNSR Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Analog, digital or video signal switching
- Microprocessor instruction decoding
- Encrypted communications system
- Paper plants
- Image transmission
- War field flying robot with a night vision flying camera
- Data demultiplexing
- GLAN
- Injectors
