CD4066BPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | CD4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Max Supply Current | 5μA |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 70 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 240Ohm |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4066BPW Overview
Providing this information in the 14-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tube represents its packaging.The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses an analog IC Bilateral, FET Switches.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.Using a 3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 4000B series, these multiplexers have a wide range of applications.The basic configuration includes 14 terminations.There is a base part number CD4066 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 5V volts.Currently, this turn signal switch has a total of 14 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Dual, Single.It is configured with 14 pins.The mounting point is Surface Mount.During mux switch's normal operation, 5/15V is provided with a power supply.The part belongs to the Multiplexer or Switches category of signal switches.The resistance of the signal switching is 1.05kOhm.A total of 4 transmission channels are available in the turn signal switch's circuit.
CD4066BPW Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BPW Applications
There are a lot of Texas Instruments CD4066BPW Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- Image transmission
- Decimal decoder
- Computer memory
- Data communication
- Code conversion
- To select different task for memory in microprocessor memory systems
- Time division multiplexing system
- CPU memory location identification
- Communication system
