CD4066BPWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bilateral, FET Switches |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | CD4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Max Supply Current | 5μA |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 70 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4066BPWG4 Overview
Due to the fact that it is provided in the 14-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged in the way of Tube.For mounting, digital switch ic uses the method Surface Mount.Bilateral, FET Switches is the analog IC that the multiplexers uses.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 3V~18V, designers are provided with a greater degree of flexibility.As a member of 4000B series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 14 range.You can also find related parts by using its logic switch base part number of CD4066.For multiplexer's system, 5V voltage is supplied.In this turn signal switch, there are 14 component pins.GULL WING represents the end of conductors.Dual, Single is employed as its supply type.This multiplexer ic has 14 pins configured.The mounting is in the way of Surface Mount.It is provided that 5/15V has a power supply in order to function normally.The digital switch ic is an electronic part classified into Multiplexer or Switches.It operates with a resistance of 1.05kOhm.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
CD4066BPWG4 Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BPWG4 Applications
There are a lot of Texas Instruments CD4066BPWG4 Signal Switches / Multiplexers / Decoders applications.
- Injectors
- HDMI applications
- VGA
- To select different devices in microprocessor input
- Speed control of medern motors
- Enabling block of memory depending on address in memory chips
- Memory chips
- Speed synchronization of multiple motors in industries
- Transmission from the computer system of a satellite
- Control unit of Central Processing unit (CPU)
