CD4066BPWR
| Parameters | |
|---|---|
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | CD4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Max Supply Current | 5μA |
| Throw Configuration | SPST |
| Quiescent Current | 20nA |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 70 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 240Ohm |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 240Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
CD4066BPWR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 14-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Bilateral, FET Switches is used.When the operating temperature is kept at -55°C~125°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 3V~18V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 4000B series, which provide extensive application potential.As part of its basic configuration, 14 terminations are designed as a part of it.Its logic switch base part number is CD4066 which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has 14 component pins.As a result, conductors end at GULL WING.Dual, Single is employed as its supply type.With 14 pins, it is configured.The mounting point is Surface Mount.During mux switch's normal operation, 5/15V is provided with a power supply.The part belongs to the Multiplexer or Switches category of signal switches.In the absence of external influences, it consumes 20nA current of multiplexer ic.A resistance of 240Ohm is used to operate it.For transmission, there are 4 channels in the turn signal switch's circuit.
CD4066BPWR Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BPWR Applications
There are a lot of Texas Instruments CD4066BPWR Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Transmission from the computer system of a satellite
- Night vision cameras
- Analog to digital conversion
- Make half adder
- Automatic health monitoring systems
- Signal router
- Paper plants
- A/D converters
- To select different devices in microprocessor input
