CD4066BPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 1.05kOhm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | CD4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Max Supply Current | 5μA |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 70 ns |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4066BPWRG4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 14-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Bilateral, FET Switches.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.Designers have greater flexibility using digital controlled switch when it works with 3V~18V voltage.Multiplexers in the 4000B series are suitable for a wide range of applications.Among its basic features are 14 terminations.The part number for CD4066 can be used to find its logic switch related parts as well.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has a total of 14 component pins.GULL WING represents the end of conductors.There is a supply type of Dual, Single employed as part of this supply.There are 14 pins on it.The mounting point is Surface Mount.In order for 5/15V to operate normally, a power supply is provided.The digital switch ic is a part of an electronic system classified as Multiplexer or Switches.With a resistance of 1.05kOhm, it operates.The turn signal switch's circuit has 4 transmission channels.
CD4066BPWRG4 Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 5/15V
CD4066BPWRG4 Applications
There are a lot of Texas Instruments CD4066BPWRG4 Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Time division multiplexing system
- D/A converters
- Injectors
- To select different devices in microprocessor input
- Combinational circuit
- A robotic vehicle with the metal detector
- Medium scale TV wall
- Video transmission
- Data bus control
