CD4066BQDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Bilateral, FET Switches |
| Resistance | 125Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 3/18V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Max Supply Current | 5μA |
| Turn On Delay Time | 30 ns |
| Supply Type | Dual, Single |
| Bandwidth | 40MHz |
| Turn-Off Delay Time | 30 ns |
| Dual Supply Voltage | 7.5V |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 70ns |
| Switch-off Time-Max | 70ns |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4066BQDRQ1 Overview
As a means of saving space, digital switch is provided in the 14-SOIC (0.154, 3.90mm Width).It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Bilateral, FET Switches is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~125°C.A supply voltage of 3V~18V provides digital controlled switch's superior flexibility for designers.Multiplexers from the Automotive, AEC-Q100, 4000B series can be used in a wide range of applications.The basic configuration includes 14 terminations.Its logic switch base part number is CD4066 which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 14 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.As a type of supply, Dual, Single is employed.The board is configured with 14 pins.The mounting point is Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 18V in order to prevent some unnecessary failures.It is provided that 3/18V has a power supply in order to function normally.Multiplexer or Switches is the classification for this the digital switch ic.A resistance of 125Ohm is used to operate the signal switching.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
CD4066BQDRQ1 Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual, Single
Power supplies of 3/18V
CD4066BQDRQ1 Applications
There are a lot of Texas Instruments CD4066BQDRQ1 Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- High-performance memory systems
- To select different devices in microprocessor output
- Speed synchronization of multiple motors in industries
- Enabling different functions units in microprocessor instruction decoding
- Medium scale TV wall
- Data-routing applications
- Data collection system
- Microprocessor instruction decoding
- Arithmetic Logic Units
