CD4067BM96G4
| Parameters | |
|---|---|
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 620.004071mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 240Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4067 |
| Output | SEPARATE OUTPUT |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 80nA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 500mW |
| Number of Bits | 16 |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 650 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 14MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Turn-Off Delay Time | 440 ns |
| On-State Resistance (Max) | 240Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 55pF |
| On-state Resistance Match-Nom | 15Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 2.65mm |
| Length | 15.4mm |
CD4067BM96G4 Overview
Presented in 24-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 16:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -55°C~125°C TA extended. Totally, there are 24 terminations. High-quality output is provided by the electronic component's 1 channels. A 5V voltage supply should turn on and run the electronic component. There is an electrical component included in the 24 series. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with CD4067. A 240Ohm internal resistance characterizes this multiplexer. You can find the functions of the 24 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 18V volts for the multiplexer. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 3V. For this digital switch to work, 80nA current would suffice. Analogue multiplexers require a 3V~18V voltage to drain from a single voltage supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. The transfer of data can be performed over 14MHz bandwidths. It is able to conduct in a 16-bit way.
CD4067BM96G4 Features
1 Channels
80nA Supply Current
Bandwidth: 14MHz
16-Bit
CD4067BM96G4 Applications
There are a lot of Texas Instruments CD4067BM96G4 Analog Switches & Multiplexers ICs applications.
- DVD-R
- Precision test equipment
- Cross Connects
- SONET/SDH ADM
- Cable Modem
- PDAs
- ISDN NT1/TA
- Battery Powered Instruments
- Wireless Local Loop
- Digital Cross-Connects
