Parameters |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
CD4067 |
Output |
SEPARATE OUTPUT |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
3V |
Operating Supply Current |
80nA |
Nominal Supply Current |
100μA |
Power Dissipation |
500mW |
Number of Bits |
16 |
Propagation Delay |
30 ns |
Turn On Delay Time |
190 ns |
Logic Function |
Demultiplexer, Multiplexer |
Supply Type |
Single |
Bandwidth |
14MHz |
Supply Current-Max (Isup) |
0.6mA |
Turn-Off Delay Time |
130 ns |
On-State Resistance (Max) |
240Ohm |
Multiplexer/Demultiplexer Circuit |
16:1 |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.2pF 55pF |
On-state Resistance Match-Nom |
15Ohm |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
650ns |
Switch-off Time-Max |
440ns |
Voltage - Supply, Single (V+) |
3V~18V |
Drain to Source Resistance |
125Ohm |
Normal Position |
NO |
Signal Current-Max |
0.025A |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Resistance |
240Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
CD4067BPW Overview
Shipping overseas is convenient due to the electrical component's packing in 24-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 24. Due to its 1 channels, the electrical component produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 24 series, this electronic part has been incorporated into the system. The multiplexer consists of 1 circuits. Try searching for the analog switch ic with CD4067 if you are looking for variants. Internally, this switch multiplexer has a resistance of 240Ohm. You can find the functions of the 24 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 18V. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 3V. This digital switch can be operated with a current of 80nA. A voltage of 3V~18V is required for this switch device, which drains from a single voltage source. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. A 14MHz-bandwidth can be used for data transfer. The Drain to Source resistance of this electronic component is 125Ohm. Its conductivity is 16-bit.
CD4067BPW Features
1 Channels
80nA Supply Current
Bandwidth: 14MHz
Drain-to-Source resistance: 125Ohm
16-Bit
CD4067BPW Applications
There are a lot of Texas Instruments CD4067BPW Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- Video signal routing
- Ultrasound
- Industrial
- DSLAMs
- Communication systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- CSU
- ISDN NT1/TA
- Private Branch Exchange (PBX)