CD4067BPWG4
| Parameters | |
|---|---|
| Turn On Delay Time | 650 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 14MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Turn-Off Delay Time | 440 ns |
| On-State Resistance (Max) | 240Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 55pF |
| On-state Resistance Match-Nom | 15Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 240Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | CD4067 |
| Output | SEPARATE OUTPUT |
| Pin Count | 24 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 80nA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 500mW |
| Number of Bits | 16 |
| Propagation Delay | 60 ns |
CD4067BPWG4 Overview
Packed in 24-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. 16:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -55°C~125°C TA. In total, there are 24 terminations. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. There is an electrical component included in the 24 series. There are 1 circuits in this switch device. Try searching for CD4067 variants of the analog switch ic. It has an internal resistance of 240Ohm. You can find the functions of the 24 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 18V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. 3V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 80nA. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. This analog switch ic utilizes SEPARATE OUTPUT output. This switch operates within the bandwidth of 14MHz. The switch device is capable of conducting in a 16-bit mode.
CD4067BPWG4 Features
1 Channels
80nA Supply Current
Bandwidth: 14MHz
16-Bit
CD4067BPWG4 Applications
There are a lot of Texas Instruments CD4067BPWG4 Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Industrial control systems
- SONET
- DVD-R
- Industrial and process control systems
- Fiber In The Loop (FITL)
- Fault Tolerant Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Communications systems
- Private Branch Exchange (PBX)
