CD4076BE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE; WITH DUAL OUTPUT ENABLE |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Function | Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Clock Frequency | 16MHz |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
CD4076BE Overview
The package is in the form of 16-DIP (0.300, 7.62mm). Package Tubeembeds it. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Through Hole. A voltage of 3V~18Vis used as the supply voltage. It is operating at a temperature of -55°C~125°C TA. The type of this D latch is D-Type. JK flip flop belongs to the 4000Bseries of FPGAs. This D flip flop should not have a frequency greater than 16MHz. In total, there are 1 elements. It consumes 20μA of quiescent In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power source is powered by 5V. The input capacitance of this JK flip flopis 5pF farads. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. It is also characterized by WITH HOLD MODE; WITH DUAL OUTPUT ENABLE.
CD4076BE Features
Tube package
4000B series
CD4076BE Applications
There are a lot of Rochester Electronics, LLC CD4076BE Flip Flops applications.
- ESD protection
- Shift Registers
- Automotive
- QML qualified product
- Clock pulse
- Balanced Propagation Delays
- Circuit Design
- EMI reduction circuitry
- Frequency Dividers
- Functionally equivalent to the MC10/100EL29
