CD4076BM96E4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4076 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Clock Frequency | 16MHz |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Propagation Delay (tpd) | 600 ns |
| fmax-Min | 8 MHz |
| Max Frequency@Nom-Sup | 3000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
CD4076BM96E4 Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 3V~18V. It is operating at a temperature of -55°C~125°C TA. D-Typeis the type of this D latch. FPGAs belonging to the 4000Bseries contain this type of chip. Its output frequency should not exceed 16MHz Hz. In total, there are 1 elements. There is a consumption of 20μAof quiescent energy. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. If you search by CD4076, you will find similar parts. An input voltage of 5Vpowers the D latch. Input capacitance of this device is 5pF farads. It is part of the FF/Latchesbase part number family. The supply voltage (Vsup) should be maintained above 3V for normal operation. Considering its reliability, this T flip flop is well suited for TAPE AND REEL.
CD4076BM96E4 Features
Tape & Reel (TR) package
4000B series
CD4076BM96E4 Applications
There are a lot of Texas Instruments CD4076BM96E4 Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Guaranteed simultaneous switching noise level
- Reduced system switching noise
- Synchronous counter
- Supports Live Insertion
- EMI reduction circuitry
- ATE
- Data storage
- Frequency Dividers
- Frequency division
