CD4076BMG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 16MHz |
| Pin Count | 16 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Current - Output | 6.8mA |
| Propagation Delay | 600 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 60 ns |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 4 |
| High Level Output Current | -4.2mA |
| Low Level Output Current | 6.8mA |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4076BMG4 Overview
The item is packaged in SOICcases. The element count is 1 . There are 16 terminations,It is powered from a supply voltage of 5V. It is mounted in the way of Surface Mount. The 16pins are designed into the board. This device's clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Due to its reliability, this T flip flop is well suited for TUBE. It consumes a total of 100μA quiescent current at any given time. -4.2mAis the output current at high level. 6.8mA is the low level output current. It is recommended that the operating temperature be lower than 125°C. The operating temperature should be higher than -55°C. It operates with the minimal supply voltage of 3V. It is capable of supporting a maximum supply voltage of 18V. 16MHzis the maximum frequency that can be achieved. D FLIP-FLOPis used as the logic IC in this D flip flop. It is equipped with 1 functions . The JK flip flop has a pin count of 16. 6.8mA provides maximum design flexibility due to its output current.
CD4076BMG4 Features
16 pins
1 Functions
16 pin count
CD4076BMG4 Applications
There are a lot of Texas Instruments CD4076BMG4 Flip Flops applications.
- QML qualified product
- Reduced system switching noise
- Automotive
- Control circuits
- Functionally equivalent to the MC10/100EL29
- Bus hold
- Guaranteed simultaneous switching noise level
- Balanced Propagation Delays
- Instrumentation
- Data storage
