CD4076BNSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4076 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Clock Frequency | 16MHz |
| Propagation Delay | 600 ns |
| Turn On Delay Time | 60 ns |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 4 |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
CD4076BNSRG4 Overview
The flip flop is packaged in a case of 16-SOIC (0.209, 5.30mm Width). Package Tape & Reel (TR)embeds it. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. Powered by a 3V~18Vvolt supply, it operates as follows. It is operating at a temperature of -55°C~125°C TA. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 4000Bseries FPGA. You should not exceed 16MHzin its output frequency. In total, it contains 1 elements. Despite external influences, it consumes 20μAof quiescent current. There are 16 terminations,JK flip flop belongs to CD4076 family. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 5pF farads. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. 4bits are used in its design. Normally, the supply voltage (Vsup) should be kept above 3V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. With an output current of 6.8mA, it is possible to design the device in any way you want. 4input lines are available for you to choose from.
CD4076BNSRG4 Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
CD4076BNSRG4 Applications
There are a lot of Texas Instruments CD4076BNSRG4 Flip Flops applications.
- Memory
- Computers
- Data storage
- Computing
- Set-reset capability
- Buffered Clock
- Asynchronous counter
- Frequency Divider circuits
- Latch-up performance
- Shift registers
