CD4076BPWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4076 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 16MHz |
| Propagation Delay | 600 ns |
| Turn On Delay Time | 60 ns |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 4 |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000Hz |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
CD4076BPWRE4 Overview
16-TSSOP (0.173, 4.40mm Width)is the packaging method. The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 3V~18V volts. It is operating at a temperature of -55°C~125°C TA. This D latch has the type D-Type. The FPGA belongs to the 4000B series. There should be no greater frequency than 16MHzon its output. The list contains 1 elements. It consumes 20μA of quiescent There are 16 terminations,The CD4076family includes it. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. 4bits are used in its design. For normal operation, the supply voltage (Vsup) should be kept above 3V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. To operate, the chip has a total of 4 output lines.
CD4076BPWRE4 Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
CD4076BPWRE4 Applications
There are a lot of Texas Instruments CD4076BPWRE4 Flip Flops applications.
- Shift registers
- Counters
- Asynchronous counter
- Data Synchronizers
- Data transfer
- Computing
- Supports Live Insertion
- Dynamic threshold performance
- Single Up Count-Control Line
- ESD performance
