CD4076BPWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4076 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 16MHz |
| Propagation Delay | 600 ns |
| Turn On Delay Time | 60 ns |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 4 |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000Hz |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
CD4076BPWRG4 Overview
16-TSSOP (0.173, 4.40mm Width)is the packaging method. The Tape & Reel (TR)package contains it. In the configuration, Tri-State, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. A voltage of 3V~18Vis required for its operation. A temperature of -55°C~125°C TAis used in the operation. The type of this D latch is D-Type. The 4000Bseries comprises this type of FPGA. A frequency of 16MHzshould not be exceeded by its output. In total, it contains 1 elements. This process consumes 20μA quiescents. The number of terminations is 16. The CD4076family includes it. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 5pF farads. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. An electronic part with 4bits has been designed. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. There are no output lines on the JK flip flop.
CD4076BPWRG4 Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
CD4076BPWRG4 Applications
There are a lot of Texas Instruments CD4076BPWRG4 Flip Flops applications.
- Frequency division
- Data transfer
- High Performance Logic for test systems
- ATE
- 2 – Bit synchronous counter
- Load Control
- ESCC
- Asynchronous counter
- CMOS Process
- Control circuits
