CD4097BM

240Ohm DUAL Analog Switches BREAK-BEFORE-MAKE CD4097 24 Pins 100nA 5V 24-SOIC (0.295, 7.50mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD4097BM
Package: 24-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 199
Description: 240Ohm DUAL Analog Switches BREAK-BEFORE-MAKE CD4097 24 Pins 100nA 5V 24-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Channel Capacitance (CS(off), CD(off))	0.2pF 35pF
On-state Resistance Match-Nom	15Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	3V~18V
Drain to Source Resistance	125Ohm
Height	2.65mm
Length	15.4mm
Width	7.5mm
Thickness	2.35mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SOIC (0.295, 7.50mm Width)
Number of Pins	24
Weight	624.398247mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Resistance	240Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	CD4097
Pin Count	24
Power Supplies	5/15V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	18V
Min Supply Voltage	3V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	80nA
Nominal Supply Current	5μA
Power Dissipation	500mW
Number of Bits	8
Propagation Delay	60 ns
Turn On Delay Time	650 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	16
Supply Type	Single
Bandwidth	20MHz
Supply Current-Max (Isup)	0.6mA
Turn-Off Delay Time	440 ns
On-State Resistance (Max)	240Ohm
Multiplexer/Demultiplexer Circuit	8:1
Current - Leakage (IS(off)) (Max)	100nA

CD4097BM Overview

Presented in 24-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -55°C~125°C TA degrees Celsius. Totally, there are 24 terminations. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component like this is included in the 24 series. A total of 2 circuits make up this switch device. Try searching for CD4097 variants of the analog switch ic. This digital multiplexer has 240Ohm internal resistance. To find out what the functions of 24 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 18V. An effective Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 3V. The switch device would be able to operate with 80nA current. A voltage of 3V~18V is required to drain this analog switch from a single voltage supply. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. Operating the 16 inputs requires 16 inputs. 20MHz bandwidths enable data to be transferred. There is 125Ohm Drain to Source resistance on this electronic part. It is able to conduct in a 8-bit way.