CD4097BME4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 240Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4097 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 80nA |
| Nominal Supply Current | 100μA |
| Number of Bits | 8 |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 650 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Turn-Off Delay Time | 440 ns |
| On-State Resistance (Max) | 240Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 35pF |
| On-state Resistance Match-Nom | 15Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4097BME4 Overview
Shipping overseas is convenient due to the electrical component's packing in 24-SOIC (0.295, 7.50mm Width). Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -55°C~125°C TA are extended for operation. A total of 24 terminations have been recorded. This electronic part offers high-quality output due to its 2 channels. A 5V voltage supply should turn on and run the electronic component. As part of its design, the 24 series is equipped with this electronic component. The circuits in this analogue multiplexer number 2. Try searching with CD4097 to find analog multiplexer variants. Analog switches have 240Ohm internal resistance. For details about the functions of 24 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 18V. Single supply type digital switch with a low cost. There should be 3V voltage fed to the electrical part below 3V. An operating current of 80nA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 3V~18V volts. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. There are 20MHz bandwidths for data transfer. It conducts in a 8-bit manner.
CD4097BME4 Features
2 Channels
80nA Supply Current
Bandwidth: 20MHz
8-Bit
CD4097BME4 Applications
There are a lot of Texas Instruments CD4097BME4 Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Communication systems
- Optical Applications
- Frame Relay Equipment
- Residential Gateways, Home Gateway/Router
- Channel Banks
- Data switching
- Fiber to the Home
- Avionics
- DSUs
