CD4099BM
| Parameters | |
|---|---|
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.3mA |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4099 |
| Pin Count | 16 |
| Output Type | Standard |
| Number of Elements | 1 |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Max Supply Current | 80nA |
| Number of Bits | 8 |
| Propagation Delay | 450 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 50 ns |
| Logic Function | D-Type |
| Current - Output High, Low | 6.8mA 6.8mA |
CD4099BM Overview
In the 16-SOIC (0.154, 3.90mm Width) package, it can be found as an embedded module. A package of Tube has been used. It uses the output configuration Standard. In this electrical device, the logic type is D-Type, Addressable. A Surface Mount mount is used for mounting this electronic part. There is no supply voltage for this device. During operation, the temperature is set at -55°C~125°C. 4000B is the series number of this FPGA. There are 8 bits in this electronic part. A device such as this has 16 terminations designed. As a member of the CD4099 family, it falls under that category. The supply voltage of the device is 5V. It has 16 pins that makes it easy to use. With the design of the board, there are only 16 pins. The electronic part is mounted using the Surface Mount method. This part is included in FF/Latches. In order to operate properly, the supply voltage (Vsup) should be greater than 3V. It features maximum flexibility in design due to 6.8mA output current. There are no external factors that affect it, so it consumes 100μA quiescent current. 1 elements are present in it. When the maximum power current (ICC) is supplied for its operation, it reaches 0.3mA.
CD4099BM Features
16-SOIC (0.154, 3.90mm Width) package
4000B series
8 Bits
CD4099 family
16 pin count
16 pins
1 elements
CD4099BM Applications
There are a lot of Texas Instruments CD4099BM Latches applications.
- Watches
- Multi-line decoders
- Decade counting 7-segment decimal display
- Four-bit storage with output enable
- Counters
- Multistage ripple counting
- Automotive HEV/EV Powertrain
- Phase comparator
- TV Set-top Boxes
- Avionics
