CD4099BPWR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4099 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 8 |
| Propagation Delay | 100 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 50 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4099BPWR Overview
There is an embedded version of it in package 16-TSSOP (0.173, 4.40mm Width). This package has the format of Cut Tape (CT). It is configured with an output of Standard. The Logic type of this electrical device is D-Type, Addressable. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 3V~18V, it operates. There is a temperature of -55°C~125°C at which the system operates. In the 4000B series, this FPGA is located. With this electronic part, there are 8 bits. In this device, there are 16 terminations. It belongs to CD4099 family. The device works with a voltage of 5V for its supply voltage. 16 pins are available on it. With the design of the board, there are only 16 pins. Surface Mount is used to mount this electronic part. There is a subcategory of FF/Latches for this part. It is recommended to have a higher supply voltage (Vsup) than 3V. There are 1 input lines in which electronic circuits are present. The reliability of this device makes it well suited to TR. The output current of 6.8mA makes it feature maximum design flexibility. Without external influences, it consumes 100μA quiescent current. In order to achieve its superior flexibility, 2 circuits are used. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.3mA.
CD4099BPWR Features
16-TSSOP (0.173, 4.40mm Width) package
4000B series
8 Bits
CD4099 family
16 pin count
16 pins
CD4099BPWR Applications
There are a lot of Texas Instruments CD4099BPWR Latches applications.
- Automotive Cluster
- Ring counter
- Parallel-to-Serial Data Conversion
- OC-48 communication systems
- Registers
- Buffer/Storage Registers
- Control circuits
- Automotive HEV/EV Powertrain
- Instrumentation
- Clocks
