banner_page

CD4508BPW

D-Type, Latch 3V~18V 8 Bits Standard Latches 4000B Series CD4508 24 Pins DUAL CMOS 24-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD4508BPW
  • Package: 24-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 282
  • Description: D-Type, Latch 3V~18V 8 Bits Standard Latches 4000B Series CD4508 24 Pins DUAL CMOS 24-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Number of Pins 24
Weight 89.499445mg
Operating Temperature -55°C~125°C
Packaging Tube
Series 4000B
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 3V~18V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Frequency 8MHz
Base Part Number CD4508
Pin Count 24
Number of Outputs 4
Output Type Standard
Number of Elements 2
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5/15V
Supply Voltage-Min (Vsup) 3V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 300μA
Output Current 6.8mA
Number of Bits 8
Propagation Delay 50 ns
Quiescent Current 80nA
Turn On Delay Time 50 ns
Logic Function D-Type, Latch
Current - Output High, Low 6.8mA 6.8mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.0015 A
Control Type ENABLE LOW
Schmitt Trigger No
Number of Output Lines 3
Count Direction UNIDIRECTIONAL
Translation N/A
Ambient Temperature Range High 125°C
Height 1.2mm
Length 7.8mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD4508BPW Overview


Package 24-TSSOP (0.173, 4.40mm Width) includes it. A package of Tube has been used. The output it is configured with uses Standard. This electrical device has Logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 3V~18V. The temperature at which the machine is operating is -55°C~125°C. The 4000B series is associated with this FPGA. There are 8 bits in this electronic part. This device has been designed with 24 terminations available. It belongs to CD4508 family. The device works with a voltage of 5V for its supply voltage. With 24 pins, it is equipped. This board has 24 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. The part is in the FF/Latches subcategory. There are 5/15V power supplies required for this machine to operate. A voltage greater than 3V must be supplied as a power supply (Vsup). It features maximum flexibility in design due to 6.8mA output current. Input lines are converted into binary equivalents by 3 output lines. The current consumed by the device is 80nA volts in quiescent mode, which cannot be affected by external factors. A total of 2 elements make up this object.

CD4508BPW Features


24-TSSOP (0.173, 4.40mm Width) package
4000B series
8 Bits
CD4508 family
24 pin count
24 pins
5/15V power supplies
2 elements

CD4508BPW Applications


There are a lot of Texas Instruments CD4508BPW Latches applications.

  • Instrumentation
  • Multi-line decoders
  • Digital bus buffer
  • Automotive Body Electronics
  • Buffer register
  • Display driver
  • Pseudo-random code generators
  • Buffer Storage
  • Flip-flops
  • Relay replacement

Write a review

Note: HTML is not translated!
    Bad           Good