CD4512BPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Data Selector/Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4512 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 8:1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 8 |
| Propagation Delay | 110 ns |
| Quiescent Current | 80nA |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Bandwidth | 8MHz |
| Output Polarity | TRUE |
| Power Supply Current-Max (ICC) | 0.3mA |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4512BPW Overview
For the purpose of saving board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).Tube is the packaging method.In terms of mounting, digital switch ic uses the method of Surface Mount.As the analog part, the circuit uses an analog IC Data Selector/Multiplexer.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 3V~18V.provides digital controlled switch's digital controlled switch'sWith the 4000B series, the multiplexers are suitable for a diverse range of applications.There is a design for terminating 16 as part of its basic configuration.There is a base part number CD4512 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V volts.There are 16 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.As a type of supply, Dual is employed.The board is configured with 16 pins.It is positioned in the direction of Surface Mount.In this signal multiplexer, there are 8 bits provided.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.The turn signal switch has 1 outputs.Despite not interacting with external factors, it consumes 80nA current of multiplexer ic.A multiplexer such as this has 8 inputs available.
CD4512BPW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
CD4512BPW Applications
There are a lot of Texas Instruments CD4512BPW Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Paper plants
- Metal detectors
- Night vision cameras
- Encrypted communications system
- Transmission from the computer system of a satellite
- Make half adder
- Computer memory
- Data collection system
- Used to connect a single source to multiple destinations
