CD4518BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 8MHz |
| Base Part Number | CD4518 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Propagation Delay | 650 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 560 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | BCD Counter |
| Max I(ol) | 0.0015 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 0.03mA |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4518BE Overview
This device is supplied in the 16-DIP (0.300, 7.62mm) package. Using 16terminations, it can be configured. 5Vis fully flexible due to its voltage supply. In total, there are 16pins on the component. Tubeis the packaging method used for this package. To connect the circuit's other components, there are 16pins. The device is mounted in the direction of [0]. This device is a member of the 4000Bseries and is well suited for a wide range of applications. It is assumed that the logic type is [0]. It is recommended to set the operating temperature to -55°C~125°C. Using a Through Holemounting type, it is mounted. In the presence of the supply voltage of [0], it can operate more reliably. There are 4 bits stored in each element of the array. It is important to note that in regards to this electronic device, GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUTis an extremely significant feature. Further related parts can be found under its base part number CD4518. In this case, there is 5/15V voltage coming from the voltage source. The minimum supply voltage (Vsup) is as low as 3V. There is 8MHz frequency associated with it. Depending on the device type, the maximum supply voltage (Vsup) can be up to 18V volts. The current consumed is 100μA when there are no external factors. A normal operation of this device is ensured by its use of 2circuits.
CD4518BE Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT
Frequency of 8MHz
CD4518BE Applications
There are a lot of Texas Instruments CD4518BE Counters & Dividers applications.
- Fixed or Programmable Frequency Division
- Programmable binary and decade
- Counter control/timers
- Frequency division
- ALGEBRAIC COMPUTATION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Time-delay circuits
- Time Out Timer for Consumer-Application Industrial Controls
- Clocks
- Divide-by"N" counters/frequency synthesizers
