CD4518BPW
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4518 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 650 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 650 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | BCD Counter |
| Max I(ol) | 0.0015 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 0.03mA |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
CD4518BPW Overview
This is a device supplied in the 16-TSSOP (0.173, 4.40mm Width) package. In order to configure it, it uses 16terminations. Having a voltage supply of 5Vallows it to operate in a highly flexible manner. The device contains 2terminations. All component pins are equal to 16. As [0], it is packaged. There are 16 pins going on to connect other parts in the circuit. Using [0], it can be mounted. The 4000Bseries offers a wide range of applications due to its versatility. It is decided to use the logic type [0]. Ideally, the operating temperature should be set to -55°C~125°C. Mounting type Surface Mountis used. In the presence of the supply voltage of [0], it can operate more reliably. There are 4 bits stored in each element of the array. As far as Pbfree code is concerned, the result may be yes. In regard to this electronic device, GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUTare essential features. Further related parts may be found under the base part number CD4518. The voltage source generates 5/15Vvoltage. A voltage of 3V is the minimum supply voltage (Vsup). In this case, the frequency is 8MHz Hz. Depending on the device type, the maximum supply voltage (Vsup) can be up to 18V volts. The current consumed is 100μA when there are no external factors.
CD4518BPW Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT
Frequency of 8MHz
CD4518BPW Applications
There are a lot of Texas Instruments CD4518BPW Counters & Dividers applications.
- SQUARE ROOT
- Control counters
- Time delay circuits
- POWER COMPUTATION
- Fixed or Programmable Frequency Division
- Programmable decade counters
- Binary counter/decoder
- LINEARIZATION
- Dual Up Counters
- Time-delay circuits
