CD4520BM96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4520 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 650 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 650 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0015 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 0.03mA |
| Timing | Synchronous |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4520BM96 Overview
This device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. It is configured using 16terminations. The supply voltage of 5V permits it to operate with full flexibility. There are wires connecting 2elements. A total of 16pins are available on all components. Tape & Reel (TR)is used to package it. There are 16 pins going on to connect other parts in the circuit. The way of Surface Mount is used to mount it. With its 4000Bseries designation, it can be used for a range of applications. Binary Counteris used as the logic type. It is recommended that the operating temperature be set to -55°C~125°C. Having a mounting type of [0], it is suitable for installation. It is able to operate with higher reliability when the supply voltage of 3V~18V is provided. There are 4 bits stored in each element of the array. As far as Pbfree code is concerned, the result may be yes. Among the features of this electronic device, GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUTare essential. The base part number of CD4520provides access to more related parts. For its packaging, TRis employed. The voltage source generates 5/15Vvoltage. The minimum supply voltage (Vsup) is as low as 3V. It operates at a frequency of 8MHz Hz. It is possible to supply voltages up to 18V volts (Vsup). In the state of [0], it consumes quiescent current.
CD4520BM96 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT
Frequency of 8MHz
CD4520BM96 Applications
There are a lot of Texas Instruments CD4520BM96 Counters & Dividers applications.
- Fixed or Programmable Frequency Division
- Timers
- Up Counters
- Signal gating
- VHF, UHF, FM, AM, etc.
- Communications Digital Frequency Synthesizers;
- Divide-by"N" counters/frequency synthesizers
- Dual Up Counters
- Analog multiplexing and demultiplexing
- Control counters
