CD4520BPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4520 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 650 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 650 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0015 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 0.03mA |
| Timing | Synchronous |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4520BPW Overview
This is a device supplied in the 16-TSSOP (0.173, 4.40mm Width) package. There are 16 terminations used for its configuration. The supply voltage of 5V permits it to operate with full flexibility. In this diagram, there are 2elements that are interconnected by wires. A total of 16pins are present on all components. There is a package in the form of Tube. Circuit components are connected by 16pins. The device is mounted in the direction of [0]. With its 4000Bseries designation, it can be used for a range of applications. Logic type Binary Counter is adopted. It is recommended to set the operating temperature to -55°C~125°C. In this case, it is mounted with a Surface Mounttype. As a result, the device operates more reliably when a supply voltage of 3V~18Vis applied. The array has 4elements. Pbfree code may result in yes. When it comes to this electronic device, GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT are much important features. You can find more related parts under its base part number of CD4520. From the voltage source, there is 5/15Vvoltage. The minimum supply voltage (Vsup) is as low as 3V. The frequency of the device is 8MHz. The maximum supply voltage (Vsup) is up to 18V. In the quiescent state, it consumes 100μA current.
CD4520BPW Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
GATED CLOCK; SCHMITT TRIGGER ON CLOCK INPUT
Frequency of 8MHz
CD4520BPW Applications
There are a lot of Texas Instruments CD4520BPW Counters & Dividers applications.
- Programmable decade counters
- Communications Digital Frequency Synthesizers;
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timers
- Fixed and programmable counters greater than 10
- Signal gating
- Clocks
- Programmable binary and decade
