CD4522BMT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Additional Feature | DUMMY VAL |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4522 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 100μA |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Down |
| Logic Type | Divide-by-N |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 0.03mA |
| Count Rate | 8MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4522BMT Overview
This device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. It is configured using 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. The 1elements are connected by wires. 16is the number of pins on all components. It is packaged in the way of Tape & Reel (TR). Circuit components are connected by 16pins. It is mounted in the way of [0]. As a member of 4000B series, it is well suited for various applications. Divide-by-Nis used as the logic type. In this case, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As a result, the device operates more reliably when a supply voltage of 3V~18Vis applied. As far as the device is concerned, there are 4bits of information. As far as Pbfree code is concerned, the result may be yes. When it comes to this electronic device, DUMMY VAL are much important features. Among its base part number [0], you will find additional parts that are related. It is packed by [0]. There is 3V minimum supply voltage (Vsup) for this device. In the quiescent state, it consumes 100μA current. 4 channels are designed to configure its basis.
CD4522BMT Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
DUMMY VAL
CD4522BMT Applications
There are a lot of Texas Instruments CD4522BMT Counters & Dividers applications.
- Frequency division
- Time-delay circuits
- counting/frequency sy nthesizers-BCD output
- SQUARE ROOT
- Binary counter/decoder
- Frequency dividing circuits
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Up Counters
- TRUE RMS-TO-DC CONVERSION
- Timing applications
