CD4532BPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Priority Encoder |
| Subcategory | Arithmetic Circuits |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4532 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 8:3 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Power Dissipation | 1W |
| Number of Bits | 8 |
| Propagation Delay | 110 ns |
| Logic Function | Multiplexer |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Bandwidth | 8MHz |
| Output Polarity | INVERTED |
| Number of Input Lines | 10 |
| Voltage Supply Source | Dual Supply |
| Number of Output Lines | 4 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4532BPWR Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.Cut Tape (CT) is the method used for packaging.The method digital switch ic adopts for mounting is Surface Mount.A digital IC Priority Encoder is used as the analog component of the multiplexers.The operating temperature of -55°C~125°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~18V supply voltage.With the 4000B series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 16 terminations.The base part number is CD4532, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V volts.Currently, this turn signal switch has a total of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Dual, which is used as the source of power.The board has 16 pins configured.The mount is in Surface Mount.As a result, signal multiplexer provides a total of 8 bits.Keeping Vsup at 3V will prevent some unwanted failures.In order for the turn signal switch to work, there are 3 outputs.Part number Arithmetic Circuits indicates that the digital switch ic is an electronic part.The switches is packaged according to the way of TR.Voltage levels are accepted through 10 input lines of multiplexers.There are 4 output lines on the signal source.For the normal operation of the device, 1 circuits must be formed.
CD4532BPWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
10 input lines
4 output lines
CD4532BPWR Applications
There are a lot of Texas Instruments CD4532BPWR Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- To select different devices in microprocessor output
- Frequency multiplexing system
- Data bus control
- Electronically controlled engine system
- Memory chips
- PCIe
- Injectors
- Combinational circuit
- Image transmission
