CD4536BPWE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Programmable Timer |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 5MHz |
| Base Part Number | CD4536 |
| Supply Voltage-Min (Vsup) | 3V |
| Operating Supply Current | 3mA |
| Load Capacitance | 50pF |
| Nominal Supply Current | 300μA |
| Power Dissipation | 500mW |
| Number of Bits | 4 |
| Propagation Delay | 8 μs |
| Quiescent Current | 100μA |
| Turn On Delay Time | 8 μs |
| Number of Timers/Counters | 1 |
| Prop. Delay@Nom-Sup | 3000 ns |
| High Level Output Current | -4.2mA |
| Low Level Output Current | 4.2mA |
| Schmitt Trigger | No |
| fmax-Min | 2.5 MHz |
| Load/Preset Input | YES |
| Count | 2 ~ 2²⁴ |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4536BPWE4 Overview
There is a 16-TSSOP (0.173, 4.40mm Width) enclosure with the programmable timer. A frequency of 5MHz is set for the programmable timer.It is used to pack in Tube case. Type Surface Mount is recommended for mounting.By using the programmable timer, it is possible to supply a voltage of 3V~18V to the circuit.The type of chips can be divided into Programmable Timer. The operating temperature of this timer clock is -55°C~125°C. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 3mA voltage. It is based on CD4536. The timer clock contains 16 pins. The supply voltage of the programmable timer can rate 5V. The number of the chip's terminations sums up to 16. The timer clock has 61.887009mg in weight. The timer clock runs quiescent current at 100μA. The number of Timers/Counters on the device is 1.
CD4536BPWE4 Features
Operate frequency at 5MHz
Package / Case: Tube
Mounting Type:Surface Mount
Quiescent Current at 100μA
1 Timers/Counters
CD4536BPWE4 Applications
There are a lot of Texas Instruments CD4536BPWE4 Programmable Timers & Oscillators applications.
- Motor control
- “Heartbeat” Timers
- Car Door Handle circuit
- Remote Data-Logger
- Thermostats
- Long Time One Shot
- Battery Powered Systems
- Tamper Detection
- Delay circuits
- Periodic “Wake-Up” Call
