CD4541BME4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Counter |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 6MHz |
| Pin Count | 14 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 100mW |
| Load Capacitance | 50pF |
| Nominal Supply Current | 300μA |
| Power Dissipation | 100mW |
| Number of Bits | 16 |
| Propagation Delay | 18 μs |
| Quiescent Current | 100μA |
| Turn On Delay Time | 18 μs |
| Number of Timers/Counters | 1 |
| Logic IC Type | BINARY COUNTER |
| Max I(ol) | 0.004 A |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | -12.6mA |
| Low Level Output Current | 12.6mA |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.3mA |
| Count Direction | UP |
| Load/Preset Input | YES |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4541BME4 Overview
It is enclosed in the SOIC packaging along with the digital timer. A frequency of 6MHz is set for the programmable timer.It is used to pack in Rail/Tube case. To mount this digital timer with Surface Mount. The minimum operating temperature of the chip must not be lower than -55°C. It's best to use the timer clock when the temperature is below 125°C. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. Its subcategory belongs to Counter. The timer clock has 129.387224mg in weight. The minimum supply voltage of the chip must not be lower than 3V. The supply voltage of this chip should not exceed 18V. The timer clock runs quiescent current at 100μA. The number of Timers/Counters on the device is 1.
CD4541BME4 Features
Operate frequency at 6MHz
Package / Case: Rail/Tube
Max Operating temperature at -55°C
Quiescent Current at 100μA
1 Timers/Counters
CD4541BME4 Applications
There are a lot of Texas Instruments CD4541BME4 Programmable Timers & Oscillators applications.
- Intruder Detection
- Low-Power Wireless
- Remote Sensors
- Remote current sensor
- Smart Key
- Home Automation Sensors
- Consumer Electronics
- Thermostats
- Periodic “Wake-Up” Call
- Clutch Actuator circuit
