CD4555BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | CD4555 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 1 x 2:4 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 190 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 440 ns |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Bandwidth | 8MHz |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 1 |
| Voltage Supply Source | Dual Supply |
| Input Conditioning | STANDARD |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4555BE Overview
For the purpose of saving board space, digital switch is included in the 16-DIP (0.300, 7.62mm).It is packaged in the way of Tube.digital switch ic uses the method of Through Hole for mounting.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~18V voltage.As a member of 4000B series, the multiplexers can be used for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.There is a base part number of CD4555 which can also be used in order to locate the logic switch that are related to this item.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has 16 component pins.Dual is used as its supply type.With 16 pins, it is configured.This unit is mounted in the way of Through Hole.Signal multiplexer consists of 4 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.The turn signal switch contains 4 outputs designed to operate.This is an the digital switch ic that is classified as Decoder/Drivers.Without external influences, it consumes 100μA current of multiplexer ic.Voltage levels are accepted through 1 input lines of multiplexers.The digitalswitch relies on 2 circuits to function normally.
CD4555BE Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Dual
1 input lines
CD4555BE Applications
There are a lot of Texas Instruments CD4555BE Signal Switches / Multiplexers / Decoders applications.
- Night vision cameras
- To select different devices in microprocessor output
- Memory system of computers
- Control unit of Central Processing unit (CPU)
- Combinational circuit
- Relay
- PCIe
- HDMI applications
- Speed synchronization of multiple motors in industries
- Microprocessor memory systems
