CD4555BPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | CD4555 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 190 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 440 ns |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Bandwidth | 8MHz |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 1 |
| Voltage Supply Source | Dual Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4555BPWR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.Using a 3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers from the 4000B series can be used in a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.In addition, it also has a base part number of CD4555, which can be used to find related parts.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch has a total of 16 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Dual.It is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.In this signal multiplexer, there are 4 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.In order for the turn signal switch to work, there are 4 outputs.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Without the influence of external factors, it consumes 100μA current of multiplexer ic.Currently, the switches is packaged in accordance with the TR method.Voltage levels are accepted through 1 input lines of multiplexers.In the mux switch configuration, there are 2 elements.
CD4555BPWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Dual
1 input lines
CD4555BPWR Applications
There are a lot of Texas Instruments CD4555BPWR Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- Microprocessor instruction decoding
- Electronics industry
- Automation system
- Decimal decoder
- Analog to digital conversion
- Enabling block of memory depending on address in memory chips
- Data communication
- Home automation system
- Implementing boolean functions with multiple variables
