CD4556BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | CD4555 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 440 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 440 ns |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Bandwidth | 8MHz |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 1 |
| Voltage Supply Source | Dual Supply |
| Input Conditioning | STANDARD |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4556BE Overview
It is included in the 16-DIP (0.300, 7.62mm) in order to save board space.In this case, it is packaged as Tube.Mounting is performed using Through Hole.the multiplexers uses an analog IC Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Using a 3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 4000B series are suitable for a wide range of applications.The basic configuration of this system includes 16 terminations.There is a base part number of CD4555 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 16 component pins.In this case, Dual is employed as the supply type.Currently, it is configured with a 16 pin configuration.As you can see, it is mounted in the direction of Through Hole.As a result, signal multiplexer provides a total of 4 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.For the turn signal switch's operation, there are 4 outputs.This is a signal switch that is categorized as Decoder/Drivers.Not being affected by the external factors, consumes 100μA current of multiplexer ic.It is possible to accept voltage levels through 1 input lines of multiplexers.The digitalswitch relies on 2 circuits to function normally.
CD4556BE Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Dual
1 input lines
CD4556BE Applications
There are a lot of Texas Instruments CD4556BE Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- Image transmission
- HD surveillance system
- Enabling different rows of memory depending on address in memory chips
- Make half adder
- Data demultiplexing
- Robotic vehicles
- Analog, digital or video signal switching
- Enabling block of memory depending on address in memory chips
- Speed synchronization of multiple motors in industries
