CD4556BM96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | CD4556 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 190 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 440 ns |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Bandwidth | 8MHz |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 1 |
| Voltage Supply Source | Dual Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4556BM96 Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).It is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~18V supply voltage.With the 4000B series, the multiplexers are suitable for a diverse range of applications.Among its basic features are 16 terminations.As its base part number is CD4556, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.As a type of supply, Dual is employed.The board has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.In the signal multiplexer, there are 4 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.As a result, the turn signal switch consists of 4 outputs.This is a signal switch that is categorized as Decoder/Drivers.No external influence consumes 100μA current of multiplexer ic.TR is used to package the switches.In order to accept voltage levels, the multiplexers have input lines 1 on the board.In the mux switch configuration, there are 2 elements.
CD4556BM96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
1 input lines
CD4556BM96 Applications
There are a lot of Texas Instruments CD4556BM96 Signal Switches / Multiplexers / Decoders applications.
- Code converters
- Used to connect a single source to multiple destinations
- Make half adder
- Injectors
- Seven segment displays
- Data collection system
- Image transmission
- Communication system
- Memory system of computers
- Textile mills
