CD4556BMT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | CD4556 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 190 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 440 ns |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Bandwidth | 8MHz |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 1 |
| Voltage Supply Source | Dual Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4556BMT Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 3V~18V, designers are provided with a greater degree of flexibility.Since they are members of the 4000B series, they can be used in a wide variety of applications.As part of its basic configuration, 16 terminations are designed as a part of it.Its logic switch base part number is CD4556 which can also be used to find its logic switch related parts.The multiplexer is supplied with 5V voltage.A component pin count of 16 can be found on this turn signal switch.As a result, conductors end at GULL WING.Dual is used as its supply type.This multiplexer ic is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.Signal multiplexer contains 4 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 3V.In order for the turn signal switch to work, there are 4 outputs.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.Despite not interacting with external factors, it consumes 100μA current of multiplexer ic.The switches package is packaged in accordance with the TR method.It is possible to accept voltage levels through 1 input lines of multiplexers.It contains 2 elements in mux switch configuration.
CD4556BMT Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
1 input lines
CD4556BMT Applications
There are a lot of Texas Instruments CD4556BMT Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- A robotic vehicle with the metal detector
- Code converters
- To select different devices in microprocessor input
- Time division multiplexing system
- Textile mills
- Encrypted communications system
- Enabling block of memory depending on address in memory chips
- Data transfer
- Video transmission
