CD4724BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latch |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4724 |
| Pin Count | 16 |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Output Current | 6.8mA |
| Number of Bits | 8 |
| Propagation Delay | 450 ns |
| Quiescent Current | 80nA |
| Turn On Delay Time | 50 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Input Capacitance | 5pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Input Lines | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4724BE Overview
In the package 16-DIP (0.300, 7.62mm), it can be found. Tube is the way in which it is packaged. Standard is used for the output it is configured with. The Logic type of this electrical device is D-Type, Addressable. The way in which this electronic part is mounted is Through Hole. There is no supply voltage for this device. The operating temperature is -55°C~125°C. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. This device has been designed with 16 terminations available. As a member of the CD4724 family, it falls under that category. The supply voltage of the device is 5V. There are 16 pins attached to it. It is designed with 16 pins. It is mounted according to the Through Hole method. This part can be found within the FF/Latch subcategory. The supply voltage (Vsup) should be greater than 3V. It contains 1 input lines where electronic circuits are present. As the output current is 6.8mA, the design flexibility is maximum. Aquiescent current is consumed by 80nA without being affected by external forces. The circuit's superior flexibility is achieved through the use of 2 circuits. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.3mA.
CD4724BE Features
16-DIP (0.300, 7.62mm) package
4000B series
8 Bits
CD4724 family
16 pin count
16 pins
CD4724BE Applications
There are a lot of Texas Instruments CD4724BE Latches applications.
- Shift right register
- Phase comparator
- Ring counter
- Serial Input
- Automatic test equipment
- Automotive Body Electronics
- Multi-line decoders
- TV Set-top Boxes
- Audio and video switching
- Bus system register with enable parallel lines at bus side
