CD4724BPWG4
| Parameters | |
|---|---|
| Number of Bits | 1 |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 50 ns |
| Logic Function | D-Type |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | D-Type, Addressable |
| Prop. Delay@Nom-Sup | 400 ns |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4724 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
CD4724BPWG4 Overview
In the package 16-TSSOP (0.173, 4.40mm Width), it can be found. The package is in the form of Tube. In this configuration, the output is set to Standard. In this electrical device, the logic type is D-Type, Addressable. Electronic components are mounted using the Surface Mount method. The supply voltage of the device is 3V~18V. The temperature at which the machine is operating is -55°C~125°C. 4000B is the series number of this FPGA. There are 1 bits in this electronic part. A device with this design has 16 terminations. The family it belongs to is CD4724. In order to operate it, the supply voltage must be 5V. 16 pins are included. Designed with 16 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Surface Mount method. FF/Latches is the subcategory of this part. In order to operate properly, the supply voltage (Vsup) should be greater than 3V. It consists of 1 input lines from which an electronic circuit can be built. It follows that 8 output lines are generated from the binary equivalent of the input line.
CD4724BPWG4 Features
16-TSSOP (0.173, 4.40mm Width) package
4000B series
1 Bits
CD4724 family
16 pin count
16 pins
CD4724BPWG4 Applications
There are a lot of Texas Instruments CD4724BPWG4 Latches applications.
- Meter applications
- Motor Drives
- Counter control
- Display driver
- Multistage ripple counting
- Automotive ADAS
- Communication systems
- Avionics
- Automotive HEV/EV Powertrain
- Relay replacement
