CD54HCT4060F3A
| Parameters | |
|---|---|
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 14 |
| Propagation Delay | 100 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 100 ns |
| Family | HCT |
| Logic Function | Counter |
| Direction | Unidirectional |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 84 ns |
| Screening Level | 38535Q/M;38534H;883B |
| Trigger Type | NEGATIVE EDGE |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Load/Preset Input | NO |
| Mode of Operation | ASYNCHRONOUS |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
CD54HCT4060F3A Overview
This device is packaged in a CDIP package. This configuration uses 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. An interconnection of 1elements is provided by wires. 16is the number of pins on all components. In this case, it is packaged as Rail/Tube. In the circuit, there are 16pins that connect other components. The device is mounted in the direction of [0]. In this case, it belongs to the family of [0]. In this device, there is information of 14bits. The temperature grade of this device is MILITARY. The voltage source produces a voltage of 5V volts. The device operates on voltage [0]. Despite operating at 125°Cfor extended periods, its electrical characteristics remain stable. It operates within a specified temperature range, with the lower limit typically set at -55°C degrees Celsius. In this case, the maximum voltage available to the device is 5.5V. It is possible to operate the device at as low a voltage as 4.5V. There is a quiescent current consumption at 8μA.
CD54HCT4060F3A Features
Embedded in the CDIP package
Operating supply voltage of 5V
CD54HCT4060F3A Applications
There are a lot of Texas Instruments CD54HCT4060F3A Counters & Dividers applications.
- Timing applications
- Fixed or Programmable Frequency Division
- POWER COMPUTATION
- Time delay circuits
- counting/frequency sy nthesizers-BCD output
- ANALOG SIGNAL PROCESSING
- Divide-by"N" counters/frequency synthesizers
- MULTIPLICATION
- Analog multiplexing and demultiplexing
- Clocks
