CD74AC112M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 129 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.6 ns |
| Family | AC |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.3ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC112M96 Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. In the configuration, Differentialis used as the output. This trigger is configured to use Negative Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 1.5V~5.5Vvolts. -55°C~125°C TAis the operating temperature. This electronic flip flop is of type JK Type. It belongs to the 74ACseries of FPGAs. It should not exceed 100MHzin terms of its output frequency. The number of terminations is 16. This D latch belongs to the family of 74AC112. Power is provided by a 3.3V supply. Input capacitance of this device is 10pF farads. It is a member of the ACfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. A Negative Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. There is a 5.5Vmaximum supply voltage (Vsup). 2 circuits are used to achieve its superior flexibility. As a result of its reliable performance, this T flip flop is suitable for TR. The power supply is 3.3/5V. As a result of its output current of 24mA, it is very flexible in terms of design. It consumes 4μA current.
CD74AC112M96 Features
Tape & Reel (TR) package
74AC series
16 pins
3.3/5V power supplies
CD74AC112M96 Applications
There are a lot of Texas Instruments CD74AC112M96 Flip Flops applications.
- Storage registers
- Test & Measurement
- Frequency Dividers
- ESCC
- CMOS Process
- Divide a clock signal by 2 or 4
- Data transfer
- Parallel data storage
- Counters
- Computing
