CD74AC112M96G4
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 129 ns |
| Turn On Delay Time | 2.6 ns |
| Family | AC |
| Logic Function | AND, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.3ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 2 |
CD74AC112M96G4 Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Differential. Negative Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. A supply voltage of 1.5V~5.5V is required for operation. The operating temperature is -55°C~125°C TA. This logic flip flop is classified as type JK Type. This type of FPGA is a part of the 74AC series. A frequency of 100MHzshould not be exceeded by its output. There is a consumption of 4μAof quiescent energy. There are 16 terminations,You can search similar parts based on 74AC112. The power supply voltage is 3.3V. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as AC. Electronic part Surface Mountis mounted in the way. This board is designed with 16pins on it. This device has the clock edge trigger type of Negative Edge. This part is included in FF/Latches. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). The superior flexibility of this product is achieved by using 2 circuits. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch runs on a voltage of 3.3/5V volts. With an output current of 24mA, it is possible to design the device in any way you want.
CD74AC112M96G4 Features
Tape & Reel (TR) package
74AC series
16 pins
3.3/5V power supplies
CD74AC112M96G4 Applications
There are a lot of Texas Instruments CD74AC112M96G4 Flip Flops applications.
- Latch
- QML qualified product
- Reduced system switching noise
- Communications
- ESD performance
- Load Control
- Control circuits
- Data storage
- Memory
- Digital electronics systems
