banner_page

CD74AC139E

16 Terminations1.5V~5.5V 16 Pin 74AC139 Signal switch74AC Series 4 Outputs2 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74AC139E
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 809
  • Description: 16 Terminations1.5V~5.5V 16 Pin 74AC139 Signal switch74AC Series 4 Outputs2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Contact Plating Gold
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 951.693491mg
Operating Temperature -55°C~125°C
Packaging Tube
Series 74AC
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Decoder/Demultiplexer
Subcategory Decoder/Drivers
Technology CMOS
Voltage - Supply 1.5V~5.5V
Terminal Position DUAL
Number of Functions 2
Supply Voltage 3.3V
Base Part Number 74AC139
Pin Count 16
Number of Outputs 4
Number of Elements 2
Circuit 1 x 2:4
Polarity Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 1.5V
Load Capacitance 50pF
Number of Bits 4
Propagation Delay 10.5 ns
Quiescent Current 8μA
Turn On Delay Time 131 ns
Family AC
Logic Function Decoder, Demultiplexer
Current - Output High, Low 24mA 24mA
Supply Type Single
Bandwidth 100MHz
Power Supply Current-Max (ICC) 0.08mA
Voltage Supply Source Single Supply
Input Conditioning STANDARD
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74AC139E Overview


Digital switch is provided in the 16-DIP (0.300, 7.62mm) for the purpose of saving board space.It is packaged according to the Tube method.In terms of mounting, digital switch ic uses the Through Hole method .For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.When operated with a 1.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74AC series multiplexers.It is designed with 16 terminations as part of its basic configuration.The base part number is 74AC139, which is also useful when looking up signal switch's related components.In multiplexer's system, 3.3V is the voltage supplied.A component pin count of 16 can be found on this turn signal switch.Single is employed as its supply type.There are 16 pins on it.The multiplexer ic is mounted in the direction of Through Hole.The logic switch object belongs to the family of AC.In this signal multiplexer, there are 4 bits that are provided.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 1.5V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.For mux switch's normal operation, power supply 3.3/5V is provided.As part of the operation of this turn signal switch, there are 4 outputs.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Without external influences, it consumes 8μA current of multiplexer ic.This mux switch configuration has 2 elements.

CD74AC139E Features


Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 3.3/5V

CD74AC139E Applications


There are a lot of Texas Instruments CD74AC139E Signal Switches / Multiplexers / Decoders applications.

  • LVDS
  • Used to connect a single source to multiple destinations
  • Data demultiplexing
  • Memory chips
  • Make half adder
  • Audio transmission
  • Data bus control
  • Combinational circuit
  • Idle motor
  • Memory system of computers

Write a review

Note: HTML is not translated!
    Bad           Good