CD74AC153M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 1.15W |
| Number of Bits | 4 |
| Propagation Delay | 18.2 ns |
| Family | AC |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC153M Overview
This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.The package is packaged in the manner of Tube.The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC Multiplexer is used.When the operating temperature is kept at -55°C~125°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 1.5V~5.5V.provides digital controlled switch's digital controlled switch'sAs a member of 74AC series, the multiplexers can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.In addition, it also has a base part number of 74AC153, which can be used to find related parts.The multiplexer's system is powered by 3.3V voltage.This turn signal switch contains 16 component pins.As a result, conductors end at GULL WING.The supply type of this multiplexer ic is Single.Currently, it is configured with a 16 pin configuration.Multiplexer ics are mounted in the direction of Surface Mount.In the AC family, the logic switch is included.In the signal multiplexer, there are 4 bits available.Avoid unnecessary failures by keeping Vsup at 5.5V.It is provided that 3.3/5V has a power supply in order to function normally.For the turn signal switch's operation, there are 1 outputs.This multiplexer has 8 inputs.For transmission, there are 2 channels in the turn signal switch's circuit.
CD74AC153M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3/5V
CD74AC153M Applications
There are a lot of Texas Instruments CD74AC153M Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- Electronics industry
- Recording transmission
- Enabling block of memory depending on address in memory chips
- Idle motor
- Seven segment displays
- Automatic Monitoring systems
- CPU memory location identification
- Automatic health monitoring systems
- Electronic circuits
