CD74AC153M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Max Power Dissipation | 1.375W |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Max Output Current | 24mA |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 20 ns |
| Family | AC |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC153M96 Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Cut Tape (CT) is the method used for packaging.The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.The operating temperature of -55°C~125°C will not be susceptible to external factors.The turn signal switch is designed for use with a 1.5V~5.5V supply voltage, which gives it a lot of flexibility.With the 74AC series, the multiplexers are suitable for a diverse range of applications.Its basic configuration includes terminations in the 16 range.You can also find related parts by using its logic switch base part number of 74AC153.For multiplexer's system, 3.3V voltage is supplied.In this turn signal switch, there are 16 components that can be connected to each pin.It employs GULL WING as the point at which conductors come to an end.There is a supply type of Single employed as part of this supply.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the AC family.In this signal multiplexer, there are 4 bits that are provided.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.Normally, 3.3/5V is powered by a battery.In order for the turn signal switch to work, there are 1 outputs.This multiplexer provides 8 inputs.TR is used to package the switches.There are a total of 2 channels used for transmitting data in the turn signal switch's circuit.
CD74AC153M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3/5V
CD74AC153M96 Applications
There are a lot of Texas Instruments CD74AC153M96 Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Seven segment displays
- Encrypted communications system
- Electronics industry
- Electronically controlled engine system
- Image transmission
- Paper plants
- Microprocessor memory systems
- Time division multiplexing system
- Speed synchronization of multiple motors in industries
